More rudder pedal work....
After locking the pilot side in place by sticking one of the lever arms all the way thru two of rudder drops. I used a square to position the brake pedals perfectly vertical.
Then the KAI's have you drill these holes starting with #30 and then upsizing them all the way up to 1/4".
Next I moved to the pilot side and did the same.
Even though the plans have been revised a few times, there are still errors in this view. They have the L & R reversed on this side.
All drilled with the bolts installed along with the rudder pedal foot pads.
No comments:
Post a Comment