Got started riveting the baggage compartment parts I primed together.
The KAI has you rivet these aft wing spar stub socket assemblies to the aft bulkhead. They call out inserting a rivet in all the holes before pulling. I left 2 just cleco'ed to hold the stuff together till I got a few rivets pulled.
Boom and
Boom.... all done!
Nice and consistent tails.
Then they have you attach this standoff using a pulled rivet.
For the first time they have you use a couple washers on the rivet tail.
After it is pulled. I assume this is to allow for proper grip length.
No comments:
Post a Comment